lteiu的部落格

The creating from raw materials methods of a mud downpour pan in a tile downpour change can trademark or mix-up the completed start.
Faulty deluge pans can organize to cracks, leaks, and an overall fiasco.
Follow these stairway in creating the mud pan and be assured to publication and re-read the complete article, as to get all materials requisite for the work and insure the labor is through with exact the opening juncture.

1. Complete conclusion of plumbing fixture territory downcast to subfloor and divider studs.
Remove all debris, and depart from state in broom-clean clause.

2. Create a moisture railing to conserve in opposition plant material rot and damage.
Staple 15lb material cloth to divider studs and complete subfloor. Overlapping seamed areas where indispensable.

3. Create the edge.
You can carcass the rainstorm restraint using thicket 2x4s nailed equally. It is industry law for a six inch curb, so 3 2x4s set up mutually will due. Recommend mistreatment untainted metal nails for fastening together.
You can besides secondary a 2x4 kerb supporting structure next to a pre-fabricated check.

4. Build a pan pre-slope.
The mud mix utilised to downright project is 1 piece Type II Portland Cement to 4 environs fresh clammy dirt. Ensure you have enough bags to mix to full-blown full hang over. (You don't want to run out and then have a "cold" displace congregate a "hot" remedy.)
Create a pre-slope to undeviating sea towards the cesspit. Ensure to hold on to al fresco bounds even and take on in nous that your decisive access ramp should get up 1/4" for every ft.

5. Install impermeable line drive.
You'll entail to purchase a waterproof fly ball that will swathe totally complete your restriction and pleat in pan and cover strongly up partition studs to growth at slightest 3" above kerb on all three walls.
Do not secure or move into fly anywhere but on edges done kerb and on top of divider studs. (Staple or nail off)
Make an "X" cut on fly ball complete culvert and pack within.

6. Install cement backerboard on divider studs.
Install 1/2" cement backerboard units all over partition studs. Use conceded fasteners, have in mind to commencement instuctions located on thorn of backerboard product.
Skim coat seams with 2" covering material snare cartridge and thinset.
Be convinced to NOT penetrate rainproof liner, and pass the time at smallest 6" above bottommost of backerboard where it meets downpour pan.

7. Trowel mud downpour pan.
Use mud mix (1 relation Type II Portland Cement to 4 surround immaculate humid sand) to write rainstorm pan.
Keep margin height and trowel pitch next to a soar of 1/4" for all linear unit. Pack almost an inch of mud completed entire curb.
Use plane point of trowel to gracious mud ended entire pan and edge. Let cure for at least 24 work time.

8. Set slab.
Install tile over pan and walls victimization take over thin-set trench mortar.

Good luck!
And Have fun.